FUNDAMENTALS OF MATERIALS SCIENCE · CHAPTER 2

Atomic Structure & Bonding II

Periodic Trends & the Four Classes of Interatomic Bonding
TEXTBOOK § 2.1.5 – § 2.2 · PART 2 OF 3
“There is a chemical bond between two atoms or groups of atoms in case that the forces acting between them are such as to lead to the formation of an aggregate with sufficient stability to make it convenient for the chemist to consider it as an independent molecular species.”Linus Pauling · The Nature of the Chemical Bond (1939)
Liang Wumse3d.com · Smart Classroom
Two atoms settle into the potential well at r₀: attraction balances repulsion to form a bond
ClickWheelor→NextPPenLLaserOOverviewFFullBBlank
OPENING

Two Questions Before We Begin

QUESTION 1

Copper wire bends repeatedly without breaking, whereas rock salt or ceramics cleave along flat planes when struck. Neither metallic nor ionic bonds are directional—why are their mechanical behaviors opposite?

Metal: Slip in Electron Sea ✓ Ductile: Bonds Intact Ionic: Half-Step Like Charges ✗ Instant {001} Cleavage
QUESTION 2

Nearly all solids expand upon heating. Suppose the interatomic potential well \(E(r)\) were a strictly symmetric parabola—would a solid still undergo thermal expansion?

Symmetric Parabolic Well Does ⟨r⟩ shift at all? Real Well: Steep–Gentle Walls Heating → ⟨r⟩ Shifts Right
This lecture bridges isolated atoms and condensed solids: first three periodic atomic parameters, then the four classes of interatomic bonds.
Atomic Structure & Bonding II
LECTURE ROADMAP

From Outer Atomic Shells to the Four Bond Classes in Solids

  1. Periodic TrendsSlater Zeff = Z − S
    Radius · IE1 · χ
    Model · Widget
  2. Force & E(r) WellAttraction vs. Repulsion
    Four Macro Mappings
    Model · Widget
  3. Metallic & CovalentDuctile Electron Sea
    Directional Sharing
    Model
  4. Hybrid OrbitalsPromotion & Payoff
    sp · sp² · sp³ Geometry
    Widget · Model
  5. Ionic & SecondaryCleavage · Pauling Formula
    vdW & Hydrogen Bonds
    Model · Widget
Aligned with Textbook § 2.1.5 & § 2.2. Six interactive models are embedded—switch to “Slip” and “Expansion” modes live during lecture.
Atomic Structure & Bonding II
01
PART ONE

Effective Nuclear Charge & Periodic Trends

Inner-shell electrons screen part of the nuclear charge; the interplay between Zeff and shell number n governs periodic chemical behavior.
  1. Shielding, Penetration & Effective Charge Zeff = Z − S05
  2. Atomic Radius, First Ionization Energy & Electronegativity06
2.1.5 · EFFECTIVE NUCLEAR CHARGE

Net Nuclear Pull on Valence Electrons: \(Z_{\mathrm{eff}}=Z-S\)

\(Z_{\mathrm{eff}} = Z - S\)
  • Slater's rules (for \(n\mathrm s/n\mathrm p\)): same shell contributes \(0.35\) (\(0.30\) in \(1\mathrm s\)), \((n-1)\) shell \(0.85\), deeper core shells \(1.00\)
  • Sodium (\(Z=11\)) valence \(3\mathrm s^1\) (\(1\mathrm s^2 2\mathrm s^2 2\mathrm p^6 3\mathrm s^1\)): \(S=2(1.0)+8(0.85)=8.80\Rightarrow Z_{\mathrm{eff}}=2.20\)
  • Gentle 3d contraction: added electrons enter inner \(3\mathrm d\) (\(S\approx0.85\)), so \(Z_{\mathrm{eff}}\) rises by only \(\sim0.15\) per proton (vs. \(0.65\) in main groups)
Textbook § 2.1.5 · Atomic Radius, Ionization Energy & Electronegativity
2.1.5 · PERIODIC TRENDS & BONDING CRITERIA

Three Periodic Parameters Predict How Two Atoms Bond

  • Atomic & ionic radii: shrink across a period (\(Z_{\mathrm{eff}}\uparrow\)), expand down a group (\(n\uparrow\)); cations shrink (\(r_+<r\)), anions swell (\(r_->r\))
  • First ionization energy \(IE_1\): \(\mathrm A(\mathrm g)\to\mathrm A^+(\mathrm g)+\mathrm e^-\); highest at top-right, lowest at bottom-left
  • Electronegativity \(\chi\): Pauling scale (F \(3.98\), Cs \(0.79\)); Mulliken scale \(\chi_{\mathrm M}=\tfrac{1}{2}(IE+EA)\), \(\chi_{\mathrm P}\approx0.336(\chi_{\mathrm M}-0.615)\)
Check \(\Delta\chi\) and mean \(\bar\chi\): large \(\Delta\chi\to\) ionic; small \(\Delta\chi\) + high \(\bar\chi\to\) covalent; small \(\Delta\chi\) + low \(\bar\chi\to\) metallic.
Textbook § 2.1.5 · Periodic Trends (Fig. 2.7)
02
PART TWO

Interatomic Forces & Potential Well

Regardless of bond class, any two approaching atoms obey the same universal mechanics of attraction, repulsion, and potential energy.
  1. Attraction, Repulsion & the Potential Energy Well E(r)08
  2. Four Macroscopic Properties on E(r) & Thermal Expansion09
2.2.1 · INTERATOMIC FORCE & POTENTIAL ENERGY

Two Atoms Approach: Pull vs. Push Locks Equilibrium at \(r_0\)

\(\begin{gathered}F_N(r) = F_A + F_R\\E(r) = -\!\int_\infty^r F_N(r')\,\mathrm dr' = E_A + E_R\end{gathered}\)
  • Attraction \(F_A\) stems from valence-electron–nucleus Coulomb pull; repulsion \(F_R\) from core-cloud overlap & Pauli exclusion
  • Equilibrium spacing \(r_0\) (\(0.2\text{–}0.3\ \mathrm{nm}\) in solids): net force \(F_N(r_0)=0\) and potential reaches \(-E_0\)
  • Bond energy \(E_0=|E(r_0)|\): primary bonds \(1\text{–}10\ \mathrm{eV/atom}\), van der Waals \(<0.1\ \mathrm{eV}\), hydrogen bonds \(0.1\text{–}0.4\ \mathrm{eV}\)
Textbook § 2.2.1 · Interatomic Force & Potential Curves (Fig. 2.8)
2.2.1 · MICROSCOPIC CURVE TO MACROSCOPIC PROPERTIES

One \(E(r)\) Curve Governs \(T_{\mathrm m}\), Lattice Constant, Modulus & Expansion

  • Well depth \(E_0\) → melting point \(T_{\mathrm m}\), cohesive enthalpy & theoretical fracture strength
  • Equilibrium position \(r_0\) → \(0\ \mathrm K\) lattice constant & theoretical crystal density
  • Bottom curvature \((\mathrm d^2E/\mathrm dr^2)_{r_0}\) → interatomic spring constant, directly setting Young's modulus \(E\)
  • Steep-left / gentle-right asymmetry → anharmonic vibration shifts \(\langle r\rangle\) outward upon heating (thermal expansion \(\alpha_{\mathrm L}\))
Invar Anomaly: FeNi36 (Invar) has \(\sim1/10\) the expansion of steel below \(230\ ^\circ\mathrm C\) because ferromagnetic demagnetization shrinkage offsets anharmonic expansion (magnetovolume effect).
Textbook § 2.2.1 · Potential-Well Geometry & the Invar Anomaly
03
PART THREE

Metallic Bonds, Covalent Bonds & Hybridization

Both unite atoms with small Δχ: globally delocalized valence electrons yield ductile metals, whereas localized directional pairs lock rigid covalent crystals.
  1. Metallic Bonding: Electron Sea & Intrinsic Ductility11
  2. Covalent Bonding & Carbon's sp³ Hybridization Ledger12
  3. sp, sp², sp³ Geometries & Unhybridized p-Orbital Rule13
2.2.2 · METALLIC BONDING

Delocalized Electron Sea Around Ion Cores: Conductive & Ductile

  • Low-\(\chi\) metal atoms release valence electrons into a crystal-wide electron sea (Fermi gas) enveloping periodic positive ion cores
  • Electrostatic attraction is non-directional, favoring geometrically close-packed structures
  • Electrical & thermal transport: free electrons drift rapidly under electric fields or temperature gradients
  • Intrinsic ductility: when shear stress slips atomic planes past one another, ion cores stay immersed in the electron sea—metallic bonds never snap
Textbook § 2.2.2 · Metallic Bonding (Fig. 2.9)
2.2.3–2.2.4 · COVALENT BONDING & HYBRID ORBITAL THEORY

Localized Electron Pairs: How Does Carbon Build a Tetrahedron?

  • Covalent bond: high-\(\chi\) atoms share electron pairs for octets via maximum overlap—strictly directional & saturable (hard, high-\(T_{\mathrm m}\), brittle, insulating/semiconducting)
  • Ground-state puzzle: carbon \(1\mathrm s^2 2\mathrm s^2 2\mathrm p_x^1 2\mathrm p_y^1\) has only 2 unpaired electrons (two \(90^\circ\) bonds), contradicting four equal \(109.47^\circ\) bonds in \(\mathrm{CH_4}\) and diamond
  • Pauling's energy ledger: spend modest promotion energy \(\Delta E\) (\(2\mathrm s\to2\mathrm p\)), then form four directional \(\mathrm{sp^3}\) hybrids—enhanced overlap releases far more bond energy than \(\Delta E\)!
Textbook § 2.2.3–2.2.4 · Covalent Bonding & Carbon sp³ Energy Ledger (Fig. 2.11)
2.2.4 · THREE CANONICAL HYBRIDIZATIONS

Each Added p Orbital Expands Geometry from 1D Line to 3D Space

sp Linear (180°)½ s character; leaves 2 perpendicular p orbitals for dual π bonds (acetylene, carbyne)
sp² Trigonal Planar (120°)⅓ s character; leaves 1 perpendicular pz for delocalized π bonding (graphene)
sp³ Tetrahedral (109.47°)¼ s character; 0 unhybridized p orbitals—all-σ 3D network (diamond, single-crystal Si)
Textbook § 2.2.4 · Hybrid Geometries & Unhybridized p-Orbital Rule (Fig. 2.12)
04
PART FOUR

Ionic, Mixed & Secondary Bonds

From electron-transfer ionic lattices, to continuous ionic–covalent ceramics, to the dipole and proton bridges governing polymers and life.
  1. Ionic Bonding & {001} Shear Cleavage15
  2. Mixed Bonding: Pauling Percent Ionicity Formula16
  3. Three Dipole Mechanisms of van der Waals Forces17
  4. Hydrogen Bonds: Ice Ih Open Lattice & Kevlar Zippers18
  5. Panoramic Comparison of the Four Bond Classes19
2.2.5 · IONIC BONDING

Opposite Charges Build High \(T_{\mathrm m}\); Half-Unit Slip Triggers Cleavage

  • Electron transfer: Na gives up \(3\mathrm s^1\) to form \(\mathrm{Na^+}\), Cl gains an electron to form \(\mathrm{Cl^-}\), both reaching closed octets
  • Non-directional: spherical Coulomb fields are isotropic; coordination is set by cation/anion radius ratio \(r_+/r_-\); high lattice energy → high \(T_{\mathrm m}\) & hardness
  • {001} Coulombic cleavage: a half-spacing shear slip brings like charges face-to-face (\(+/+\), \(-/-\)), causing intense repulsion and brittle cleavage
  • Solid state locks ions on lattice sites (insulator); molten or aqueous ions migrate freely to conduct
Textbook § 2.2.5 · Ionic Bonding & {001} Cleavage (Fig. 2.13)
2.2.5 · MIXED IONIC–COVALENT BONDING

Pure Ionic and Pure Covalent Are Extremes—Most Ceramics Sit Between

\(P_{\mathrm{ionic}}=1-\exp\!\bigl[-0.25(\Delta\chi)^2\bigr]\)
  • Covalent fraction \(P_{\mathrm{covalent}}=\exp[-0.25(\Delta\chi)^2]\) transitions continuously with \(\Delta\chi\)
  • NaCl (\(\Delta\chi\approx2.23\)): 71% ionic; MgO (\(\Delta\chi\approx2.13\)): 68% ionic
  • SiO2 (\(\Delta\chi\approx1.54\)): 45% ionic—classic balanced ionic–covalent sharing
  • SiC (\(\Delta\chi\approx0.65\)): only 10% ionic; GaAs (\(\Delta\chi\approx0.37\)): 3.4%, predominantly covalent
Δχ
Textbook § 2.2.5 · Pauling Percent Ionic Character Formula
2.2.6 · VAN DER WAALS FORCES

Dipole Fluctuations & Polarization: \(r^{-6}\) Secondary Bonds Rule Soft Matter

  • Keesom (orientation): electrostatic attraction between aligned permanent dipoles of polar molecules
  • Debye (induction): a permanent dipole polarizes an adjacent nonpolar electron cloud (typically weakest)
  • London (dispersion): quantum fluctuations create instantaneous dipoles that synchronize neighbors—present in all atoms/molecules, dominating HCl (\(\sim80\%\)) and nonpolar polymers
Thermoplastics (PE, PVC) pair strong intrachain covalent backbones with weak interchain van der Waals forces, enabling melt molding upon mild heating.
Textbook § 2.2.6 · Three Origins of van der Waals Forces (Fig. 2.14)
2.2.6 · HYDROGEN BONDING

Bare-Proton “Molecular Zippers”: Why Does Ice Float on Water?

  • When H bonds covalently to small, high-\(\chi\) F, O, or N, its stripped proton bridges a neighbor's lone pair to form \(\mathrm{X{-}H\cdots Y}\) (\(0.1\text{–}0.4\ \mathrm{eV/atom}\))
  • Strongly directional (\(\approx180^\circ\) collinear) and saturable
  • Anomalous low density of ice Ih: tetrahedral H-bonds prop open hexagonal channels, expanding volume \(\sim9\%\) upon freezing
  • Polymers & life: dense interchain H-bond “molecular zippers” give Kevlar ballistic strength; H-bonds also stabilize DNA double helices and proteins
Textbook § 2.2.6 · Hydrogen-Bond Networks & Polymer Design (Fig. 2.15)
2.2 · SUMMARY OF INTERATOMIC BONDS

The Four Bond Classes Side by Side: Mechanism to Macro Behavior

Bond ClassMicroscopic MechanismBond Energy (eV/atom)DirectionalityTypical Solids & Macroscopic Properties
MetallicDelocalized electron sea + ion cores1 – 5 (W: 8.9)NoneCu, Al, Fe; conductive, non-rupturing slip, ductile
CovalentLocalized shared electron pairs3 – 8StrongDiamond, Si, SiC; hard, high Tm, brittle, insulating/semicond.
IonicElectron transfer & Coulomb pull3 – 8NoneNaCl, MgO, Al2O3; high Tm, solid insulator, {001} cleavage
vdW / H-bondDipole attraction / X–H···Y bridge< 0.1 / 0.1–0.4None / StrongPE, PVC, ice Ih, Kevlar, DNA; low Tm or directed assembly
Local bonding explains mechanical and thermal trends; to rigorously explain metals, semiconductors, and insulators, Part 3 extends two atoms to \(10^{23}\)-atom energy bands.
Textbook § 2.2 · Comparison of the Four Interatomic Bond Classes
SUMMARY

From Effective Nuclear Charge to the Four Bond Classes

Zeff = Z − S→Radius · IE1 · χ→Δχ & E(r) Well→Metallic · Covalent · Ionic · vdW/H→Tm · Modulus · Ductility
ANSWER TO QUESTION 1

In metals, sheared ion cores stay immersed in the delocalized electron sea without breaking bonds; in ionic crystals, a half-unit slip aligns like charges face-to-face, triggering intense Coulomb repulsion and cleavage.

ANSWER TO QUESTION 2

In a strictly symmetric well, larger thermal amplitude leaves the midpoint unchanged (\(\langle r\rangle\equiv r_0\)), giving zero thermal expansion! Macroscopic expansion arises from the steep-left, gentle-right anharmonicity of real \(E(r)\) wells.

Next in Part 3 (Chapter 2 Finale): From diatomic molecular orbitals to solid energy bands, unified through carbon allotropes.

Atomic Structure & Bonding II
QUICK QUIZ

Three Quick Checks: Click an Option or Launch a Class QR Poll

1. Using Slater's rules, what is the effective nuclear charge \(Z_{\mathrm{eff}}\) felt by the valence \(3\mathrm s^1\) electron in Na (\(Z=11\), \(1\mathrm s^2 2\mathrm s^2 2\mathrm p^6 3\mathrm s^1\))?

Core \(1\mathrm s^2\) gives \(2\times1.0\) and \(2\mathrm s^2 2\mathrm p^6\) gives \(8\times0.85\), so \(S=8.80\) and \(Z_{\mathrm{eff}}=11-8.80=2.20\).

2. Which geometric feature of the interatomic potential curve \(E(r)\) directly governs a solid's Young's modulus \(E\)?

Spring constant \(k=(\mathrm d^2E/\mathrm dr^2)_{r_0}\): a steeper well bottom demands higher stress per unit strain, giving higher \(E\).

3. Why does ballistic fiber Kevlar exhibit far higher tensile strength than ordinary thermoplastic PVC?

PVC chains rely only on weak vdW forces, whereas rigid Kevlar chains lock via dense directional interchain hydrogen bonds.

Atomic Structure & Bonding II
FUNDAMENTALS OF MATERIALS SCIENCE · CHAPTER 2

Thank You

Six Embedded Models: Shielding & Penetration · Interatomic E(r) · Metallic Bond · Hybrid Orbitals · Ionic Cleavage · Ice H-Bonds — mse3d.com