“Matter always flows down the chemical-potential slope (−∇μ)—diffusion only looks concentration-driven when chemical-potential and concentration gradients point the same way.”Fundamentals of Materials Science · Ch. 7 From Kirkendall Drift to Uphill Diffusion & High-T Creep
Plate pure \(\mathrm{Cu}\) onto \(\alpha\)-brass with two inert \(\mathrm{Mo}\) wires at the weld interface and anneal: why do the two \(\mathrm{Mo}\) wires move closer together into the brass core, and how did this single experiment clinch the vacancy mechanism for substitutional diffusion?
Why does switching a solid electrolyte's anion sublattice from oxides to sulfides (\(\mathrm{Li_6PS_5Cl}\)) boost room-temperature \(\mathrm{Li^+}\) conductivity \(50\text{-fold}\)? And even when bulk \(\sigma_{\mathrm{ion}}\) rivals liquids, what still chokes the rigid solid–solid interface?
Refining grains boosts both room-temperature yield strength and toughness—so why do jet-engine engineers coarsen grains or cast grain-boundary-free single-crystal turbine blades for ultrahigh-temperature service?
In \(\mathrm{Cu/\alpha\text{-}brass}\), \(D_{\mathrm{Zn}}^{\mathrm{int}}\gt D_{\mathrm{Cu}}^{\mathrm{int}}\) drives a net vacancy backflow into brass where plane annihilation shifts \(\mathrm{Mo}\) markers inward, refuting direct exchange; sulfide \(\mathrm{Li_6PS_5Cl}\) uses large, polarizable \(\mathrm{S^{2-}}\) to widen bottlenecks and lower \(Q_{\mathrm{m}}\), leaving solid–solid contacts and space-charge layers as the key frontier.
Above \(\sim 0.5T_{\mathrm{m}}\), tensile stress creates boundary chemical-potential drops \(\Delta\mu\sim\sigma\Omega\), driving Nabarro–Herring (\(\propto d^{-2}\)) and Coble (\(\propto d^{-3}\)) creep—finer grains creep dramatically faster, which is why jet-engine turbine blades eliminate grain boundaries altogether as single crystals.
Next up — Chapter 8 · Phase Equilibria & Phase Diagrams: common-tangent & lever rules, Gibbs phase rule, binary isomorphous / eutectic / peritectic systems, and the \(\mathrm{Fe\text{–}Fe_3C}\) phase diagram.
1. Inert \(\mathrm{Mo}\) wires sit at a pure \(\mathrm{Cu}\) / \(\alpha\)-brass (\(\mathrm{Cu\text{–}Zn}\)) interface during high-\(T\) annealing. Given \(D_{\mathrm{Zn}}^{\mathrm{int}}\gt D_{\mathrm{Cu}}^{\mathrm{int}}\), what is observed and what is Darken's \(\tilde{D}\)?
Fast \(\mathrm{Zn}\) outflow pulls a net vacancy backflow into brass, forming pores and shifting \(\mathrm{Mo}\) wires toward brass; Darken's \(\tilde{D}\) cross-weights mole fractions.
2. Regarding thermodynamic factor \(\Phi\), uphill diffusion, and parabolic reactive diffusion, which statement is completely accurate?
\(\Phi\) shares the sign of \(G''\), driving spontaneous uphill demixing when \(G''\lt 0\); above \(570\,^\circ\mathrm{C}\), vacancy-rich \(\mathrm{Fe}_{1-x}\mathrm{O}\) accelerates scaling; solid electrolytes require \(t_{\mathrm{ion}}\to 1\).
3. Refining a polycrystal's grain size \(d\) from \(100\,\mu\mathrm{m}\) down to \(10\,\mu\mathrm{m}\) (\(1/10\)) at fixed high \(T\) and low \(\sigma\) multiplies Nabarro–Herring and Coble creep rates by:
\(\dot{\varepsilon}_{\mathrm{NH}}\propto d^{-2}\) rises by \(10^2=100\times\), while Coble's extra boundary-area factor \(\delta/d\) gives \(\dot{\varepsilon}_{\mathrm{Coble}}\propto d^{-3}\), surging by \(10^3=1000\times\).