“The comprehension of the laws which govern any material system is greatly facilitated by considering the energy and entropy of the system in the various states of which it is capable.”J. Willard Gibbs · On the Equilibrium of Heterogeneous Substances (1876)
x₀ = 0.42
| Phases \(P\) | Freedom \(f^*\) | \(T\text{–}x_{\mathrm{B}}\) Geometry & Reading Rule |
|---|---|---|
| \(P=1\) | \(f^*=2\) | Single-phase field (area): \(T\) and \(x_{\mathrm{B}}\) vary independently inside the region. |
| \(P=2\) | \(f^*=1\) | Two-phase field: picking \(T\) pins both phase compositions at horizontal tie-line ends; lever rule sets shares. |
| \(P=3\) | \(f^*=0\) | Three-phase isotherm & invariant point: \(T\) and all three compositions are locked onto a horizontal line! |
Unary three-phase coexistence imposes \(2\) independent \(\mu\) equalities (\(f=1-3+2=0\)), pinning the triple point at a single \((T,p)\), while volume contraction on melting (\(\Delta V\lt 0\)) gives ice a negative Clapeyron slope. Matching \(\mu_{\mathrm{A}}\) and \(\mu_{\mathrm{B}}\) simultaneously merges two tangents into one common tangent, and mass balance yields the opposite-arm lever rule.
Under practical casting rates in \(\mathrm{Cu\text{–}Ni}\), solid-state diffusion lags behind freezing: early \(\mathrm{Ni}\)-rich cores become encased in progressively \(\mathrm{Cu}\)-richer shells, shifting \(\bar{w}^\alpha\) rightward, depressing final freezing, and leaving dendritic coring.
Next Lecture (Three Competing Free-Energy Curves) — Phase Equilibria & Phase Diagrams II: eutectic, eutectoid, monotectic, peritectic, and peritectoid invariant reactions plus intermediate compounds.
1. At \(273.15\text{ K}\) and \(1\text{ atm}\), ice melts with \(\Delta H_{\mathrm{m}}=6.01\text{ kJ/mol}\), \(V_{\mathrm{m}}^{\mathrm{ice}}=19.65\), and \(V_{\mathrm{m}}^{\mathrm{liq}}=18.02\text{ cm}^3/\text{mol}\). What is the melting-curve slope \(\mathrm{d}p/\mathrm{d}T\)?
\(\Delta V_{\mathrm{m}}=-1.63\times 10^{-6}\text{ m}^3/\text{mol}\); \(\mathrm{d}p/\mathrm{d}T=\Delta H_{\mathrm{m}}/(T\Delta V_{\mathrm{m}})\) \(=6010/[273.15\times(-1.63\times 10^{-6})]\) \(\approx -13.5\text{ MPa/K}\).
2. At \(1\text{ atm}\), a \(\mathrm{Cu\text{–}48\%Ni}\) alloy at \(1300\,^\circ\mathrm{C}\) has tie-line endpoints \(w^L=45\%\) and \(w^\alpha=55\%\). What are the conditional freedom \(f^*\) and solid mass fraction \(f^\alpha\)?
In a binary two-phase region, \(f^*=2-2+1=1\); opposite lever arm gives \(f^\alpha=(48-45)/(55-45)=30\%\) (closer to \(L\), so \(70\%\) liquid).
3. Regarding regular-solution miscibility gaps and non-equilibrium isomorphous solidification, which statement is completely accurate?
Single-phase polycrystals are one phase; between binodal and spinodal \(G''\gt 0\) is metastable (requires nucleation); isomorphous lenses hold at most two phases (\(L+\alpha\)).