“Different phase-diagram types are not unrelated ‘species,’ but geometric outcomes of the exact same free-energy model under different interaction parameters.”Fundamentals of Materials Science · Ch. 8 From Atomic Bond Energies to Three-Phase Common Tangents
Why did decades of classic \(\mathrm{Sn\text{–}37Pb}\) electronics solder and modern lead-free \(\mathrm{SAC305}\) both converge right near a eutectic composition? What three decisive advantages does it hold over off-eutectic alloys?
When a hypoeutectic \(\mathrm{Pb\text{–}40\text{ wt\% }Sn}\) alloy cools just below \(183\,^\circ\mathrm{C}\), equilibrium phase accounting gives \(73\%\) \(\alpha\) phase—so why do large primary \(\alpha\) grains occupy only \(50\%\) of the optical micrograph?
All three are \(f^*=0\) invariant three-phase reactions—so why does eutectic \(L\to\alpha+\beta\) finish cooperatively at tiny undercooling, whereas peritectic \(L+\alpha\to\beta\) and peritectoid \(\alpha+\beta\to\gamma\) almost always stall incomplete under conventional cooling?
h = 0.60 hₘ
| Type | Cooling Rxn | Middle Pt | Engineering Benchmarks |
|---|---|---|---|
| Eutectic | \(L\to\alpha+\beta\) | V-down (split) | \(\mathrm{Pb\text{–}Sn}\;183\,^\circ\mathrm{C}\), \(\mathrm{Fe\text{–}C}\;1148\,^\circ\mathrm{C}\) |
| Eutectoid | \(\gamma\to\alpha+\beta\) | V-down (split) | \(\mathrm{Fe\text{–}C}\;727\,^\circ\mathrm{C}\), \(\mathrm{Ti\text{–}Al}\;1120\,^\circ\mathrm{C}\) |
| Monotectic | \(L_1\to\alpha+L_2\) | V-down (split) | \(\mathrm{Cu\text{–}Pb}\;955\,^\circ\mathrm{C}\) |
| Peritectic | \(L+\alpha\to\beta\) | Inv-V (merge) | \(\mathrm{Fe\text{–}C}\;1495\,^\circ\mathrm{C}\), \(\mathrm{Cu\text{–}Zn}\;902\,^\circ\mathrm{C}\) |
| Peritectoid | \(\alpha+\beta\to\gamma\) | Inv-V (merge) | \(\mathrm{Fe\text{–}Zn}\;550\,^\circ\mathrm{C}\) (+ metatectic/syntectic) |
Eutectic alloys offer the lowest melting point, isothermal zero-mushy-zone fluidity, and \(100\%\) fine coupled lamellae—ideal for solders. In \(\mathrm{Pb\text{–}40\%Sn}\) at \(182\,^\circ\mathrm{C}\), spanning the full isotherm gives \(73\%\) total \(\alpha\) phase, whereas spanning \((18.3,61.9)\) gives \(50\%\) coarse primary \(\alpha\) microconstituent.
Eutectic \(\alpha\) and \(\beta\) grow side-by-side into liquid via short \(\lambda/2\) lateral liquid diffusion; peritectic and peritectoid products coat reactant interfaces with a solid rim, forcing sluggish through-rim solid diffusion (\(h\propto\sqrt{Dt}\)) that stalls under normal cooling.
Next in Finale Part 3: Phase Equilibria & Phase Diagrams III — the \(\mathrm{Fe\text{–}Fe_3C}\) system, \(\mathrm{Cu/Al/Ti}\) alloys, Gibbs ternary triangles, CALPHAD & Ellingham diagrams.
1. At \(183\,^\circ\mathrm{C}\) in \(\mathrm{Pb\text{–}Sn}\), \(\alpha(18.3\%)\), \(L_{\mathrm{E}}(61.9\%)\), and \(\beta(97.8\%)\) coexist. For \(\mathrm{Pb\text{–}40\%Sn}\) cooled to \(182\,^\circ\mathrm{C}\), what are the mass fractions of primary \(\alpha\) (microconstituent) and total \(\alpha\) phase?
Primary \(\alpha\) lever spans \((18.3,61.9)\): \((61.9-40)/(61.9-18.3)\approx 50\%\); total \(\alpha\) phase lever spans \((18.3,97.8)\): \((97.8-40)/(97.8-18.3)\approx 73\%\).
2. In the \(\mathrm{Fe\text{–}C}\) peritectic reaction \(L_{0.53}+\delta_{0.09}\to\gamma_{0.17}\) (\(1495\,^\circ\mathrm{C}\)), after a hypoperitectic steel with \(w_0=0.12\%\text{ C}\) completes equilibrium reaction, what phases remain and what is \(f^\gamma\)?
Since \(0.12\%\) lies between \(\delta(0.09\%)\) and \(\gamma(0.17\%)\), liquid runs out first into \(\delta+\gamma\); \(f^\gamma=(0.12-0.09)/(0.17-0.09)=3/8=37.5\%\).
3. Regarding three-phase isotherm reading rules, the Law of Adjoining Phase Regions, and intermetallic compounds, which statement is completely accurate?
V-down is decomposition (eutectic/eutectoid/monotectic), inverted-V is synthesis (peritectic/peritectoid); two single-phase fields must be separated by a two-phase field (\(\Delta P=\pm 1\)); only congruently melting compounds split diagrams.